SAPE the French manufacturer leader in design and manufacture of pneumatic and electric industrial vacuum cleaners to measure.

This unit exists with vat capacity 80 or 200 liters.

The operating device makes it possible to remove and give instantaneously the vat.

This mobile group is conceived for the painting, dust extraction, powder, soot etc...

The cyclone separator, placed on the barrel decanter upstream of the filter, is adapted perfectly to trap the aspired products (approximately 95%).

This equipment allows an effective protection of the filter and thus avoids its filling. The operating device makes it possible to remove and give instantaneously the vat equipped with casters.

This unit is particularly conceived for the aspiration in large quantity of waste.

The tilting system makes it possible to easily drain the barrel of 200 liters.

This entirely automatic model is adapted perfectly for the cleaning of machine tools. Aspiration of liquid and chips.

A sieve placed in the barrel of 200 liters makes it possible to recover the chips. Draining is carried out with a diaphragm pump.

Proposed on silo of 100 or 200 liters, this vacuum cleaner is perfectly adapted for various fields of application: Powders, paintings, talc, plaster, soot, sand, pellets, chips, corundum, shot...

Draining is done easily thanks to the drain valve. The chassis can on casters or fixed and be dimensioned for draining in buckets.

This unit is especially conceived for the aspiration, the de-dusting and recycling of shot, corundums, etc...

The dynamic separator, placed above the silo, makes it possible to separate fine dust from the shot. The vacuum-cleaned shot falls by gravity in the silo, fine dust are recovered in the filter.

Entirely automatic, it is enough to open the valve of the vacuum cleaner so that the unit functions. As of the stop of the aspiration, the drainage sluice of the silo opens and the shot falls into the sand spreader.

This unit allows the use of barrel of recovery of 200 liters.

Equipped with a cyclone separator, this apparatus is designed for the aspiration of dust, powders, shot, chips, etc...

This whole of aspiration and repression is especially conceived for the liquids. A system of inversion of the compressed air allows the fast dump of the tank.

Exist in capacity 200, 500, 800 and 1000 liters.